WUXI CHENENG ENVIRONMENTAL ENGINEERING & EQUIPMENT CO.,LTD
WUXI CHENENG ENVIRONMENTAL ENGINEERING & EQUIPMENT CO.,LTD Environmental solution
Add to Cart
DAF clarifier wastewater and sewage treatment for Food , Pharmaceutical Industry
Features of SOR
1. Design treatment capacity:1-100 m3/h.
2. High-rate clarifier for high SS water (light particles, oil and colloid).
3. Fully(100%) manufactured in the factory, and no need secondory welding. It costs 3h for 2 manpower to assemble.
4. Indoor or outdoor layout (environmental temperature should be over 0°C).
5. Apply to automatic & continious operation.
6. Design life: Carbon steel material: >10years;
Stainless steel material: >20years.
Use
Corresponding water quality: high SS, and the specific gravity of suspended solids or contaminants is generally slight greater than water, settle effectively and have a pretty clear tendency to precipitate, like:
Oil and Fats, Food Industry effluents with high solids concentration,
Sludge Thickening,
Galvanizing Electroplanting,
Pharmaceutical Industry,
Leather Industry,etc.
Specifications
| Type | Treatment | Tank | Tank | Tank | Pump | Air compressor | Skimmer |
| SOR-1 | 1m³/h | 1400 | 550 | 1100 | 0.55 | 0.55 | 0.18 |
| SOR-2 | 2 m³/h | 1800 | 700 | 1300 | 0.55 | 0.55 | 0.18 |
| SOR-3 | 3 m³/h | 2800 | 800 | 1900 | 0.75 | 0.75 | 0.37 |
| SOR-5 | 5 m³/h | 3000 | 1000 | 1900 | 1.1 | 0.75 | 0.37 |
| SOR-10 | 10 m³/h | 4000 | 1200 | 2100 | 1.5 | 0.75 | 0.37 |
| SOR-15 | 15m³/h | 4500 | 1500 | 2100 | 2.2 | 0.75 | 0.37 |
| SOR-20 | 20m³/h | 4500 | 1800 | 2100 | 2.2 | 0.75 | 0.37 |
| SOR-30 | 30m³/h | 5500 | 2000 | 2100 | 3.0 | 0.75 | 0.37 |
| SOR-40 | 40m³/h | 6000 | 2200 | 2100 | 5.5 | 0.75 | 0.37 |
| SOR-50 | 50m³/h | 6000 | 2700 | 2100 | 7.5 | 1.5 | 0.37 |
| SOR-60 | 60m³/h | 7000 | 2800 | 2100 | 7.5 | 1.5 | 0.37 |
| SOR-70 | 70 m³/h | 8000 | 3000 | 2100 | 11 | 2.2 | 0.55 |
| SOR-80 | 80m³/h | 9000 | 3200 | 2100 | 11 | 2.2 | 0.55 |
| SOR-100 | 100 m³/h | 9000 | 3600 | 2100 | 15 | 2.2 | 0.55 |
Carbon Steel surface finish and corrosion treatment
1. Sand Blasting/ Shot Peening, ISO Sa≥2.5,epoxy Zinc Rich Primer, 50μm/coat.
2. Internal: a) Epoxy Zinc-rich Primer, 50μm/coat×1;
b) Epoxy Mastic Paint, 100μm/coat×2~3;
c) Total film thickness: ≥250μm.
3. External: a) Epoxy Zinc-rich Primer, 50μm/coat×1;
b) Epoxy Micaceous Iron Intermediate Paint, 50μm/coat×1;
c) Polyurethane Finish, 50μm/coat×1;
d) Total film thickness: ≥150μm.
Spraying Method: High-Pressure Airless Spraying
Device Color: Light Sea Blue (PANTONE No.RAL5015),or according to customers’ demands.
